Category Archives: R&D

Double Cone 10 Lites

  • Home
  • /
  • Double Cone 10 Lites

Double Cone 10 Lites

Double cone operates on free flow principle. This unit is used for rapid mixing of all types of free flowing powders and granules. The uniform, multidimensional arrangement of the mixer walls ensures good mixing. The vessel is manufactured from stainless steel and secured with threaded knobs. This unit can be attached to the Universal Gearing.

Technical Specification
Gross Capacity 10 Kgs.
Working capacity 7-8 Kgs.
Net weight 12 Kgs.
Gross weight 30 Kgs.
Packing 20” x 15” x 15” inch
Dimensions 15” x 12”x 10” inch

V-mixer

V-mixer

The ‘V’ Blender is mainly used for mixing of dry power and its provides excellent results when mixing two different powers. This mixer provides a unique movement to the powers and thus mixes them very well. It is suitable to processing different kind of materials of pharmaceuticals, chemicals, foods, cosmetics etc. This Attachment is Suitable to Attached in our all Main Drive.

Technical Specification
Gross Capacity 2 Kgs./ 1.5 liters
Working capacity 0.5 Kg / 0.5 liters.
Net weight 6 Kgs.
Gross weight 15 Kgs.
Dimensions 15” x 8”x 12” inch

Cube Mixer

Cube Mixer

The Mixing movement of the product in the mixer is deflected and interfered by three mixing rods made of stainless steel. The cube Mixer is a based on a movement, which through its tumbling effect produces in the shortest possible time a homogeneous mixture. The product to be mixed is treated very gently. The cube Mixer can be attached to the universal gearing. The housing is manufactured from stainless steel. This Attachment is Suitable to Attached in our Main Drive.

Technical Specification
Gross Capacity of Cube 3 Kgs. / 7 liters
Working capacity 2 Kg / 5 liters.
Net weight 8 Kgs.
Gross weight 15 Kgs.
Dimensions 12” x 12”x 11” inch

Coating Pan

Coating Pan

The Coating pan is used to produce uniform coating on tablets with the help of Baffles inside of pan .This can be mounting on the universal Gearing and as a result different tilting angle can be set up to 45 Degree. It is also permits speed control at any desired RPM.The pan capacity is 9.5 Liters Approx.

Technical Specification
Gross Capacity 10 Liters.
Working capacity 7 to 8 liters.
Baffles inside Pan 3 nos.
Dimensions 18”Dia x 11” heights with Flange
Net weight 25 Kgs.
Gross weight 40 Kgs.
Packing 18” x 18” x 15” inch

Main Drive All Purpose

  • Home
  • /
  • Main Drive All Purpose

Main Drive All Purpose

The Horizontal Main Drive type is the basic machine of the Boson All-purpose equipment. All our Multi-attachments units can be easily and quickly connected and disconnected to the main drive with the help of two quick locking and unlocking hand knurled knobs & it features a 1 HP, 220 V / 50 Hz /, Single Phase fitted with A.C DRIVE. The Main motor Drive is equipped with a very efficient & maintenance free gearbox with maximum torque.  The speed is variable and can be adjusted infinitely between 5 to 425 RPM working range by an electronic speed control. This is done via an electronic speed controller and the corresponding rpm is displayed digitally. The drive also includes a Digital timer in order to set time-based operations. A separate 15 Amp. Power supply socket provided for attachments require heating system.

Technical Specification
Main Gear Motor 0.75 kw.
Max. output torque at continuous operation 55 Nm torque.
Timer adjustment 0 to 999 minute.
Speed Adjustment Infinitely.
RPM 5 Minimum to 434 Max.
Dimensions 24” x 12” x 18 inch
Net weight 52 Kg.
Gross weight 74 Kg.
Packing size –outer 31” x 21” x 32” inch
Power supply 220 v, 50 Hz, Single Phase

12 Stn Multi Tooling

  • Home
  • /
  • 12 Stn Multi Tooling

12 Stn Multi Tooling

Lab Press LP- 1 is a High Tech Rotary Tablet Press in table-top design for R & D and small batch production. This Single sided R & D Tablet Press fully conforms to GMP and the safety requirements. All Electrical settings can be performed by Front panel with indicators at the front of the machine. The turret is driven by center shaft drive mechanism by a motor and Powerful Reduction gear box. The turret speed is adjusted by A.C. frequency drive. The drive is provided by an inbuilt three-phase motor with A.C Frequency Drive (inverter). The compression force can be adjusted up to 6 tons. The cleaning easy to dismantle and operator safety are given to attention in the machine design.

TECHNICAL DETAILS
Type BOSON LAB PRESS 12 STN.(D,B,BB)
Type of Tooling “4D” , “4B” & “4BB”
No. of Station 12 Stn.
Max. Operating pressure 6.5 Tons.
Max. Tablet Diameter 23.0 mm (for “D” Tooling only)
Max. Depth of fill 20.0 mm (for “D” Tooling only)
Output Tab./Hour 2,400 to 7,200
Turret RPM 10 – 30
Main Motor 2 H.P. / 1440 RPM

Agitator

Agitator

Agitator is used for stirring, agitating and beating. All kind of liquids, emulsions, suspension and similar mixtures. Agitator can mix all types of different viscous liquids. Tiring action duplicates manual stirring motions. The total capacity of the kettle is 5 Liters.  The working capacity approx. 3 Litres. The kettles and stirring arm are made of stainless steel.  This Attachment is Suitable to Attached in our All Main Drive.

Technical Specification
Gross Capacity 5 liters
Working capacity 3 to 4 liters.
Net weight 12 Kgs.
Gross weight 20 Kgs.
Dimensions 10” x 8”x 8” inch

Sieve Shekar – Sifter

  • Home
  • /
  • Sieve Shekar – Sifter

Sieve Shekar – Sifter

This operates on the reciprocating cam principle. The intensity of the vibration can be adjusted by changing the speed of the drive unit. The shaker can be fitted with various sieve sets according to customer’s requirements. This Attachment is Suitable to Attached in our Main Drive.

Technical Specification
Working capacity 10 Kgs / hour. [Depends on Mesh sizes.]
Dimensions 10’ x 11”x 16” inch
Net weight 10 Kgs.
Gross weight 20 Kgs.
Available Size (Extra coast) Between 4 to 200 Mesh.

*** Note: Any 3 size will be inclusive with Sieve shaker & remaining will be at Extra Coast.

Universal Gear

  • Home
  • /
  • Universal Gear

Universal Gear

The universal gearing is a basic requirement for our different attachment like the Coating Pan, Polishing Drum, Pelletizer, Cube Mixer, Mini Ball mill etc. The Universal Gearing required when the operating angles for the above attachments have to be changed. The unit offers an adjustment of the angle of operation from 0 to 60 degrees. This Attachment is Suitable to Attached in our Main Drive.

Technical Specification
Speed – Maximum 410 RPM
Dimensions 18”’ x 8”x 12” inch
Net weight 8 Kgs.
Gross weight 14 Kgs.