Category Archives: Liquid section

Turn Table

Turn Table

TECHNICAL SPECIFICATION
ITEM Description
Model 36” – BTT
Direction Clockwise / Anti clock wise as per requirement
RPM of Disk Through ACVFD
Electric Specifications 0.5 HP/415 V/50 Hz
Height of Table 860 mm ( 50 mm + – )
TECHNICAL SPECIFICATION
ITEM Description
Model 48” – BTT
Direction Clockwise / Anti clock wise as per requirement
RPM of Disk Through ACVFD / Delta Make
Electric Specifications 0.5 HP/415 V/50 Hz/
Height of Table 860 mm ( 50 mm + – )

Air Jet Bottle Cleaning Machine

  • Home
    • /
  • Air Jet Bottle Cleaning Machine

Air Jet Bottle Cleaning Machine

TECHNICAL SPECIFICATION
Model BAJC-120
Output per Hours 2400 – 7000
Main Motor 0.5 HP /415 Volts/ 3 Phase / 50 Hz.
Blower Motor 0.5 HP /415 Volts/ 3 Phase / 50 Hz.
Cleaning Cycle Positive air Pressure and vacuum Cleaning
Working Height 860 mm (50 mm + – )
Round Bottle Size 30mm to 60mm diameter & 110 mm height maximum
Electric Load 1 KW
Air Consumption 10 CFM @ 4 to 6 Kgs

Salient Features:

  • Positive Air Pressure and vacuum Cleaning
  • Easy Operation
  • Stationary S.S. nozzles in cleaning zone
  • Inverts the bottles before cleaning
  • Individual control for air pressure and vacuum cleaning
  • Higher capacity blower for accurate cleaning
  • S.S. pressure meter
  • Machine can be designed in double track configuration for higher output

Bottle Washing Machine

  • Home
    • /
  • Bottle Washing Machine

Bottle Washing Machine

MODEL  BMWM-64 BMWM-96
Out put / Hour* 2600 to 6000
4300 to 9000
No. of Container Holder 64 96
Direction of Machine
Clock wise

Electric Specifications Main Motor 0.5 HP / 415 Volts / 50 Hz

Pump (2 Nos.) 1 HP / 415 Volts / 50 Hz X 2 Nos

Electric Heaters 3 3 kW.

Tank Capacity 75 Ltrs. S.S. 316 (2 Nos.)

Wash Cycle
4 Inner+1 Outer

Working Height 860 mm ± 50 mm
Change parts required (1) Neck Dia.: Neck holding pocket
(2) Flat Containers : Special type of cups

Bottle Liquid Filling Machine

  • Home
    • /
  • Bottle Liquid Filling Machine

Bottle Liquid Filling Machine

Model BMLF-50 BMLF-100 BMLF-150 BMLF-200
Output PerHour 1200 to 3000 2400 to 6000
3600 to 9000
5000 to 12000
Direction of Movement Left to Right
Direction of Movement Left to Right



Number of head/Syringe 2 Nos 4 Nos
6 Nos. 8 Nos
Fill Size
5 ml to 1000 ml

Main Motor 1 HP / 415 Volts / 50 Hz. (1.5 HP for 1000 ml filling) 2 HP

Conveyor Motor 0.5 HP / 415 Volts / 50 Hz.

Height of Conveyor
860 mm ± 50 mm Adjustable.

Change parts required (A) Syringes, (B) Nozzle, (C) Inlet & outlet hose pipe.

Bottle Cap Sealing Machine

  • Home
    • /
  • Bottle Cap Sealing Machine

Bottle Cap Sealing Machine

TECHNICAL SPECIFICATION
Model BMCS-100 BMCS-150 BMCS-200
No. Of Sealing Head 4 Head 6 Head 8 Head
Output per Hours 3500 to 5000 3500 to 8000 5000 to 12000
Main Motor 1.5  HP/415 V / 50Hz 1.5 HP/415 V / 50Hz 2 HP/415 V / 50Hz
Cap Feeding Bowl Motor 0.25 HP/415 V/ 50Hz 0.25 HP/415 V/ 50Hz 0.25 HP/415 V/ 50Hz
Direction of Movement Left to Right
 Height of Conveyor 860 mm ( 50 mm Adjustable )
Change Parts Required 1.Container – Star Wheel / Center Guide / Feed Worm 2. Cap           – Die & Delivery Chute

Head Air Jet Cleaning

  • Home
    • /
  • Head Air Jet Cleaning

Head Air Jet Cleaning

TECHNICAL SPECIFICATION
Model BAJC-120
Output per Hours 2400 – 7000
Main Motor 0.5 HP /415 Volts/ 3 Phase / 50 Hz.
Blower Motor 0.5 HP /415 Volts/ 3 Phase / 50 Hz.
Cleaning Cycle Positive air Pressure and vacuum Cleaning
Working Height 860 mm (50 mm + – )
Round Bottle Size 30mm to 60mm diameter & 110 mm height maximum
Electric Load 1 KW
Air Consumption 10 CFM @ 4 to 6 Kgs

Salient Features:

  • Positive Air Pressure and vacuum Cleaning
  • Easy Operation
  • Stationary S.S. nozzles in cleaning zone
  • Inverts the bottles before cleaning
  • Individual control for air pressure and vacuum cleaning
  • Higher capacity blower for accurate cleaning
  • S. S. pressure meter
  • Machine can be designed in double track configuration for higher output

Bottle Labelling Machine

  • Home
    • /
  • Bottle Labelling Machine

Bottle Labelling Machine

Sr. Description Rate Qty Amount.
1 Automatic High Speed SELF ADHESIVE (STICKER) Vertical Round Container Labeling Machine, Model HL-150SA. Input & Other Technical Specifications are as detailed in  our enclosed Catalogue. SS 304 ConstructionAC Frequency Drive for Speed ControlMicroprocessor Based Label Dispenser Stepper Drive 3,50,000/- 01 3,50,000/-
1.1 Extra Charge for Ink Roller Type Printer 65,000/- 01 65,000/-
1.2 Extra Charge for Hot Foil Printer 1,10,000/- 01 1,10,000/-
1.3 Extra Charge for Inkjet Printer   1,65,000/- 01 1,65,000/-
TECHNICAL SPECIFICATION
Model BMSL-100
Out Put / Per Min *** 80 to 100 bottle ( Depend upon size of bottle )
Power 230 Volts (Single Phase) / AC 50 Hz.
Machine Dimensions L  1828 mm x W 610 mm x H 1200 mm
Case Dimensions L  2030 mm x W 760 mm x H 1325 mm
Container Dia 20 mm to 90 mm
Conveyor Belt 6 Feet / SS -304
Input Specification
Label Height 10 mm to 160 mm
Label Length 12 mm to Unlimited
Gap Between Two Lables 5 mm Minimum
Label Roll Dia 300 mm Maximum
Label Core Dia 75 mm

Salient Futures : 

  • S.S. GMP MODEL.   
  • STEPPER MOTOR : 60 Kg./cm2 –
  • PROGRAMMABLE MMI UNIT.  – STANDARD –  OUR OWN PROGRAMMING.
  • IMPORTED SENSOR FOR LABEL & CONTAINER.    (  BANNER  MAKE )
  • AC FREQUENCY DRIVE FOR CONVEYOR & PRESSING DEVICE.
  • ( DEALTA MAKE / ALLEN BRADLY  MAKE )
  • GEAR BOX & MOTORS  ARE  IMPORTED.  ( BONFIGLIOLLI MAKE )
  • TOTAL SYNCHRONISED WITH STEPPER MOTOR AND AC MOTORS WITH SINGLE SPEED VARIATOR PORT.
  • IN-BUILT SPEED INDICATOR & COUNTER.
  • PRESSING UNIT FOR ROUND CONTAINER LABELLING.
  • NO CHANGE PARTS REQUIRED.
  • NO Bottle No Labelling Sysytem.

Bottle Inspection Machine

  • Home
    • /
  • Bottle Inspection Machine

Bottle Inspection Machine

TECHNICAL SPECIFICATION
Model BMTI-100
No. Of Operator 4 ( 2 x 2 ) Both side   
Output per Minutes 100
Main Motor 0.5  HP/415 V / 50Hz / 3 Phase
Height of Conveyor 860 mm (50 mm Adjustable )

Colloid Mill

Colloid Mill

COLLOIDAL MILL MACHINE
TECHNICAL SPECIFICATION
Model MMCM – (Horizontal)
Output * 150 to 1500 Ltr./Shift.
Particle size reduction ** 5 to 10 Microns.
Hopper capacity 15 Liters.
Motor 3 HP / 2850 RPM /  3 Ph.
Height 1200 mm.

Salient Features:

  • All contact parts are made out of SS 316. No casting are used for avoiding contamination problems.
  • Coupling provided between motor shaft and rotor shaft for ease in maintenance – Vertical Model.
  • Three oil seals between the motor and the processing chamber to prevent liquid going in the motor winding, resulting in the burning of the motor.
  • Modified design of semi concave teeth in rotor and stator reduced motor HP and gives better performance in size reduction without damaging the product.
  • Extended bearing housing specially designed to facilitate fine adjustments of bearing clearances or backlash to avoid metal to metal contact of rotor and stator. This unique design provides smooth and consistence all round performance and long life of rotor and stator.
  • Three-way cock for draining and re-circulation of liquids provided as standard.
  • Contact parts can be easily dismantled for cleaning.
  • Special design facilitates adjustment of grinding gap by an exterior screw by means of handle even during operation. Flameproof motor and flameproof rotary switch can be provided on request at extra cost.

Out Put : Depending upon viscosity of material &  Depending upon material.

Filter Press

Filter Press

SPARKLER FILTER PRESS [ SIZE 8″ DIA X 6 PLATES ]
Technical Specifications
Model MM- FP     8” dia x 6 Plates
No. of Plates 6 Nos.
Height of Plates 25mm
Thickness of Plates 18 swg
Shell Thickness 1.6mm
Bottom Plate 6mm
Scavenger Plate 10mm thick
Top Lid 1.6mm with skirt ring
Support Screen 7 Nos. of 1.2mm thk
Interlocking Cup 7 nos.
M.O.C. S.A.240 Gr. S.S.  304 / 316/316L quality.
Filtering Area 0.209 m2.
Cake Holding Cap. 4.78 Ltrs.
Output* 400 – 600 * Ltrs/hr.
Pump ½ ” Centrifugal pump with TC V/S TC Seal and coupled to 1 HP 3 phase 1400 rpm NFLP motor
Gasket Neoprene/Silicon.      
Nozzles                        Inlet ¾” NB
Nozzles                        Outlet ½” NB
Airvent ¼” BSP
Dial type Pressure Guage ¼” BSP – 7Kg
End Connection Nozzle type.
Surface Finish Mirror polished.
Trolley SS304 trolley with SS Bracket, fibre castor wheels
Dimensions 840x535x895 Approx
(Depends on liquid to be filtered quality of filter media & percentage of solid contents *. Output rate in terms of 5 % activated carbon & water.)