Category Archives: Tablet section

Communiting Mill

  • Home
    • /
  • Communiting Mill

Communiting Mill

Technical Specifications

Model  BM-CM
Rotor speed 1000 – 2250 – 4500 RPM
Blades Fix Beaters (Stainless Steel with knife and impact edge).
Output * 25-300 Kgs. / Hr.
Screens Round/Square hole perforated S. S. SheetWoven S. S. wire mesh
Electrical Motor 5.5 KW / 7.5 HP / 1440 RPM / 3 Ph.

Salient Features:

  • All Contact Parts SS316 & Non Contact Parts SS304 with MOC Certificate.
  • All Electrical Parts used CE Certified Company
  • Motor Make CROMPTON or Equivalent.
  • Beaters assembly bearings are in a separate pillow blocks for ease in maintenance.
  • Very less down time as only beaters assembly will have to be reversed (and not the complete chamber) for making it knife to impact forward or vice-versa which can be done by single operator.
  • Fixed beaters assembly is provided as a standard supply which increase the output by 10% to 30% reduce noise level and also ease to clean as there are no cavities. (If product demands, swing beaters assembly can be provided.)
  • Beaters are fitted on a splined shaft.
  • Transmission of heat to the chamber from bearings is minimum as they are away in separate pillow blocks. This facilitates to some extent in processing of heat sensitive products.
  • Castors wheel provided for mobility and breaks can be applied for fixing machine at one place.
  • Beaters assembly is dynamically balanced which reduce vibration and noise level and increases bearings life.
  • Machine is available in plain & water-jacketed Model.

Vibro Sifter

Vibro Sifter

Model BMS 20” BMS 30” BMS 36” BMS 48″
Screen Dia. 503 mm
 752 mm
914 mm 1200 mm
Capacity/Hour 20 to 200 Kgs 30 to 300 Kgs 30 to 325 Kgs 200 to 400 kgs
Charging height
1200 mm without Lid

1050 mm without Lid 1050 mm without Lid 1340 mm
Discharging height 720 mm
670 mm 670 mm 850 mm
Main Electric Motor 0.25 HP
0.5 HP 1 HP 1.5 HP

*Varies according to product characteristic and screen type .

  • Compact vibratory design for high speed & dust free sieving.
  • Noiseless and maintenance free machine.
  • All contact parts and screen made of SS 316.
  • Low power consumption compared to reciprocating vibratory system.
  • Easy dismantling and cleaning of contact parts.
  • Machine available with flame proof and Double Deck & Triple Deck (optional)

Tray Dryer ( Model 24/48/96/190)

  • Home
    • /
  • Tray Dryer ( Model 24/48/96/190)

Tray Dryer ( Model 24/48/96/190)

TECHNICAL SPECIFICATION
MODEL BTD-48
LOADING CAPACITY 48 TRAY.
EXTERNAL DIM. 1835 x 1045 x 1930 mm.
INTERNAL DIM.                           1015 x 895 x 1855 mm.
NO. OF DOOR ONE
NO OF FAN                                  ONE
MOTOR 1 HP
ELECTRICAL HEATER 6 KW
TROLLEY DIM. (mm.)                  840 x 960 x 1780 mm.
TRAY SIZE 16” x 32” x 1¼”

CABINET: Made of SS 304Q inside S.S.18 SWG –SS-304 16 SWG outside with thick S.S. sheet insulated with 75-mm glass wool insulation.

Chamber Provided with single door with Heavy-duty hinges and locked with the help of spring loaded ball latch with suitable locking pressure.

TRAYS & TROLLEY: Fabricated from S.S. 304 Q  sheet Having Size: 16” x 32” x 1¼”.

1NO Trolley Fabricated from 25mm. square pipe of S.S. 316 Q Vertically & 25mm. angle guides of S.S. 304 Q. and Provided With two nos. of revolving wheel & two nos. of fixed castor wheels.

STEAM CIRCULATION: Fabricated from SS-304 pipes, Radiator with S. S. fins. Fitted with 20-micron air filter & suction chamber.

IMPELLOR: SS-316 Q with S.S. bush to attain uniform air circulation in the chamber with dampers to control air flow.

SAFETY WINDOW: 1’ x 1’ on backside.

CONTROL PANEL: Digital control panel with PT-100 sensor & digital  controller, MCP, RYB, Relay, contactors, etc

Oscillating Granulator

  • Home
    • /
  • Oscillating Granulator

Oscillating Granulator

TECHNICAL SPECIFICATION

Model Available from Single Stiral & Double Stiral

Model BM-OG
Hopper Capacity 33 Liters
Screen area 388 mm (W) x 762 mm (L)
Stirrer size Ø 138 mm x 368 mm Length
Oscillation 110 Per Minute.
Output * 30 to 200 Kgs./Hr.
Charging height 1135 + 5 mm
Discharging height 655 + 5 mm
Power supply 1 HP / 1440 RPM / 3 Ph./ Crompton Make

Salient Features:

  • All Contact Parts SS316 & Non Contact Parts SS304 with MOC Certificate.
  • All Electrical Parts CE Certified Company
  • Motor Make CROMPTON Or Equivalent
  • Gear Box Make YES or Equivalent
  • Sturdy and durable.
  • Easy to operate / clean / maintain.
  • Noise level minimum.
  • Continuous oscillating stirrers drive.
  • Simple screen holding and tensioning device.
  • Screen – Available in different size / durable / cost effective

Coating Pan Machine Hot Air Blower

  • Home
    • /
  • Coating Pan Machine Hot Air Blower

Coating Pan Machine Hot Air Blower

Technical Specifications

Model BCP12 BCP18 BCP30 BCP36 BCP42 BCP48 BCP60 BCP72
Pan Size 12” 18” 30” 36” 42” 48” 60” 72”
Loading Capacity in Kg. 15 25 45 80 100 150 210 350
Motor H.P. 0.5 0.5 1.0 1.0 2.0 2.0 5.0 7.5
Blower H.P. 0.5 0.5 1.0 1.0 1.0 1.0 2.0 2.0
Heater Capacity in Kw. 1.0 1.0 3.0 3.0 3.0 3.0 5.0 5.0

Salient Features:

  • Pan is made by SS 316 & All Non Contact Parts SS304.
  • Totally enclosed with MS cladding with standard gearbox, motor, and hot air blowing arrangement.
  • Designed with fabricated structure and all arrangement except electric control, and SS Pan are inside the enclosure, which makes simple cleanable outside covering.
  • 30”, 36”, 42” or 48” Coating Machine has variable speed drive. Hot air blowing system is separate.

Dust-Extractor

  • Home
    • /
  • Dust-Extractor

Dust-Extractor

TECHNICAL SPECIFICATION

Model DE-300
Electric Motor 1.5 HP / 2800 RPM / 3 Ph.
Filtration Area 1.343 Sq. Mtr.
Dust Storage Capacity 40 Liters.
Suction Capacity 300 CFM (500 Mtr. Cube / Hr.) at 125 mm W.G.

Salient Features:

  • Provided with stainless steel 304 contact parts.
  • Blower fan is dynamically balanced and the unit is with castor wheels.
  • Minimizes mechanical strain, excessive wear of tableting machine – resulting in minimum machine breakdown and punch wears.
  • All inlet manifolds and dust collection tray are of Stainless Steel.
  • Four inlet manifolds facilitate to connect press machine, and two De-Dusting units.
  • Castor wheel provided for ease in mobility.

De-burring and De-dusting

  • Home
    • /
  • De-burring and De-dusting

De-burring and De-dusting

TECHNICAL SPECIFICATION

Model MMDB-300
Output (for 8mm tablet)* 5,000 to 2,50,000 tablet / Hr.
Electric Motor 0.25 Hp. / 1440 RPM / 3 Ph. 
Max. Tablet Diameter 25 mm
Min. Tablet Diameter 5 mm.

Salient Features:

  • Noiseless & Maintenance free unit.
  • Electric power consumption is very less compare to other machines of the kind.
  • Height adjustment facility provided with the unit to suit with any Rotary Tableting Machine.
  • All contact parts made of SS 304 and components can be easily washed and/or sterilized.
  • SS 316 quality contact parts – optional.
  • Tablet conveying route is so geometrically designed for imingement of tablets on their burrs, which can break easily.
  • Efficient De-Burring & De-Dusting and full suction output is concentrated on De-Dusting zone for flushing out powder.

Out Put :  Depending upon tablet shape & size

Single Side Rotary Tablet Press 16,20,23 (STN)

  • Home
    • /
  • Single Side Rotary Tablet Press 16,20,23 (STN)

Single Side Rotary Tablet Press 16,20,23 (STN)

Technical Specifications

Model BMR-16 BMR-20 BMR-23
Tooling “D” “D” Die B & Punch D
No. of Station 16 Stn. 20 Stn. 23 Stn.
Operating Force 10 Ton 10 Ton 10 Ton
Max. Tablet Diameter 23 mm 23 mm 15.8 mm
Max. Depth of fill 20 mm 20 mm 18 mm
Output Tab./Hour 14,400 to 40,300 18,000 to 50,400 20,700 to 57,950
Electric Motor 2 HP / 960 RPM 2 HP / 960 RPM 2 HP / 960 RPM

Salient Features:

  • Hand wheel provided.
  • Re-designed variable speed pulley.
  • Turret of SG IRON 400/12 grade.
  • Sturdy and easy fit Feed Frame with sufficient height to avoid spill over of powder.
  • Central oil lubrication system with hand pump.
  • Cam tracks and pressure rolls made out of alloy steel for maximum wear resistance and long life. Worm is made up Phosphor Bronze.
  • Machine is totally enclosed i.e. Top half of the machine (Compression zone) with S.S. hood, acrylic covers, and lower half of the machine complete with SS Cover in GMP Model and in standard model top hood and lower half of the machine with MS color painted. This reduces the noise level and to & fro flow of dust between compression zone and machine room.
  • Anti vibration mounting provided, hence no foundation required.
  • Large paints free compression zone with plenty of space for ease of cleaning & accessibility of components in GMP Model.
  • Ease of operation and maintenance.
  • Higher turret speed 15 to 42 RPM gives higher output than standard machine.
  • Friction plate is provided on cam plate to minimize wear & tear of cam track, which also facilitates its easy replacement.
  • Fly over on upper punch is provided to avoid the jumping of upper punches.
  • Reverse direction motion protection is provided to avoid major accident.
  • Imported needle roller bearing provided at the bottom of turret, which is immersed in oil for frictionless rotation.
  • Aluminum covers for rotor teeth.