Octagonal Blender operates on free flow principle. This unit is used for dry blending, rapid mixing of all types of free flowing powder and granules, mixing, lubrication and homogenizing of the powder and granules. It consists of octagon shaped body, rectangular central portion and top and bottom polygonal frustum. The uniform, multidimensional arrangement of the Blender walls ensures good blending and mixing. For fast and effective mixing detachable baffles are provided. The vessel is manufactured from stainless steel.

Octagonal Blender Machine gives best result for granules due to very slow speed and octagon shape of container. It can be uses for Pharmaceutical, Food, Chemical and Cosmetic products etc. In Pharmaceutical Octagonal Blender the granules come from all sides due to the octagonal shape of the product container, hence requirement of RPM is less. Suitable mainly for Crystalline & Granular type material. This type of material gets sufficient continuous movement due to their shape if container have only slow movement and will results in good quality of blending / lubrication of granules.

Technical Specifications

Model	BOB-5
Working Volume	10 L (5 Kg of Product with 0.5 gms/cc Bulk Density)
Gross Volume	12 L
Contact Parts	SS 316 Material
Non Contact Parts	SS 304 Material
Surface Finish – Internal	240 Grit Mirror Polish
Surface Finish – External	180 Grit Matt  Polish
Blender RPM	2-10 through AC Drive
Charging	Manually
Discharge	By Gravity / 4” dia. Butterfly Valve.
Gaskets	Food Grade Silicone Rubber
Motor	0.5 HP / 960 RPM /
Electrical Control Panel	AC VFD Drive , Digital control Panel , Relays, Contactors, On-Off ,  Inch. Push Buttons, RYB Indicators, Timer– 0-60 min. range, safety guard interlock to drive, etc.
Design Temperature	Ambient to 55 degree C.
Design Pressure	Atmospheric
Cleaning	Manually or by compressed air.
Free Space Required (LWH) mm	600 x 600 x 700 aprox.

Utility Requirement

Electric Supply Voltage	3 Phase / 415 Volt /50 Hz

Note-Electric voltage & frequency can be provided as per customer’s requirement to specify while placing an order.

Salient Features

Safety Guard made from Square pipe around the outer area, in which blender rotates. Limit Switch coupled with the safety guard for safety of Man & Machine.  Mounting rectangular and ‘A’ shaped stand for drive support the entire assembly. Shell consists of Octagonal Shape and bottom part is provided with a butterfly valve, which is used to discharge the powder & Upper part is provided with a manhole for charging and cleaning access. Easy for loading and unloading of material  Baffles are adjustable removable SS-316 pipe type to fit in the shell. It will be mirror polished. The Drive Assembly of Blender is made by combination of Worm Reduction Gear box & an Electrical motor, which is coupled through Chain coupling or Pulley & Belt or chain & Sprocket method, to obtain a final Output speed of 10 RPM approx. The Drive shaft end & other opposite end is guided & supported through heavy duty Plumber Blocks & Rotated by Gear box through chain or Flexible coupling. Suitable for dry mixing of products in granule form. The Octagon Shape and slow speed of rotating gives sufficient continuous movement to the granules. result in good quality. Simple design requires minimum maintenance. General structure & safety guards made out of SS 304 & polished to the mirror finish in cGMP Model. Maximum care has been taken to ensure safe operation of the unit. Wing nut and having Food Grade Gasket prevention for leakage

Item  / Make

AC VFD Drive	Schneider or Equivalent
Electric Motor	Rotomotive
Electrical Parts / Switches	Salzer / Teknic or Equivalent

BOSON Rapid Mixer is mainly used in wet mixing of the batches. Basically, it consists of a Bowl, Impeller & Chopper assembly. High shear wet granulation process is extensively used in pharmaceutical industry to transform fine heterogeneous powders into homogenous blend of granules with bigger size and density to improve flow and compatibility for tableting operation.

It consists on main structure, which is made from Stainless 304 grade. All main drive related assemblies are covered in to main structure.  High shear wet granulator combines 3-blades impeller with design able to ensure a very good movement of the granules even at low speed. The blade tips of the granulator are positioned tangentially to avoid any dead spots.

cGMP : Mixer is designed to achieve all the requirements of cGMP – Current Good Manufacturing Practices. The components are easily dismantable, can be cleaned thoroughly and assembled in quick time. The shaft seals are very effective to check any leakages and cross contamination due to adherants. The bowl and all the components are of highly polished Stainless Steel and without sharp corners or crevices.

Technical Specifications

Model	BRMG-1 Kg
Contact Parts	SS – 316 Material
Non Contact Parts	SS – 304 Material
Surface Finish	Product contact part, 240 grit  (0.5 , 25 Ra)      – Mirror finish Non – contact part,    180 grit      (0.64 , 25 Ra) – Matt finish
Main Body	Fabricated structure from Stainless steel square pipes and is covered from SS 304 guards, all main drive related assemblies are covered in to main structure.
Mixing Bowl	Vertical Cylinder & conical shape Made from SS 316 quality with full ark welded with Lid SS 316 quality and having groove for silicone gasket & safety interlock
Main drive Mechanism	Main drive mechanism through TEFC motor coupled with worm reduction gearbox direct drive mechanism, mixing blades consisting of 3 Nos. full blades specially designed for intense and uniform mixing.
Chopper Mechanism	Chopper mechanism drive through a TEFC motor granulating unit with 4 Nos. specially designed blades for faster granulation of products.
Top Lid	Manual operating top Lid along with transparent polycarbonate guard for view operation.
Bottom Discharge Valve	Manually operated discharge valve.
Pneumatically Discharge Valve (Optional)	Pneumatically operated bottom discharge valve and safety interlock client required. – Client required
Panel Board	Panel board is fabricated with SS 304 material.  This unit mounted on the machine platform for easy operability.  Panel consisting of switch gear fuses, relays, motor, starter, indicating lamp, push buttons, control for discharge valves, amp meters for main motor and granulating motors, pressure gauge solenoid valve control & isolator , Emergency Push Button etc.
PLC HMI  –  ( Optional )	PLC + HMI touch Screen –  client required.
Air purging	Pneumatic pressure switch and air purge system for Impeller and Chopper.
Fluidization – (Optional )	Pneumatic pressure switch and air spray nozzle on bottom of bowl for fluidization of product –client required
Pneumatic Circuit	Pneumatic circuit would consist of pressure line 4 to 5 Kg cm2 with filter cum regulator .

Technical Specifications for Model Wise

Model	BRMG-1 Kg
Working Capacity In Litres	2 L Ltr.
Overflow Vol. Ltr. Max	2.5 Ltr.
Main Motor  Std. make     /  3 Phase	0.5 HP/1440 rpm
Main Motor RPM  through ( ACVFD )	5-200 variable
Chopper Motor  Std. make  / 3 Phase	0.25 HP/ 1440 rpm
Chopper Motor RPM through (ACVFD )	500-3000 rpm
Material on Contact parts	S.S.316
Material on Non Contact parts	S.S.304
Overall Dimensions : L X W X H  in mm	L 850 X W 600 X H 900  mm
Appox Net Wt. in Kgs	150 Kgs

Utility Requirement

Electric Supply Voltage	3 Phase / 415 Volt /50 Hz
Compressed Air	6 Bar (87 PSI)

Note-Electric voltage & frequency can be provided as per customer’s requirement to specify while placing an order.

Salient Features

RMG can be used in the fields of Pharmaceuticals / Bulk Drugs and processing of special food stuffs. Short batch time & reduced cleaning time. Enclosed moving parts. Maximum care has been taken to ensure machine safety. Air purge sealing for main shaft and granulator shaft. System control ranges from simple manual push button control to full programmable logic controller (PLC)based automation. Discharge provided on either side to suit Client’s requirement. Steam Jacketed drying also available on request to meet specific process requirements ( Optional ). Use of bearings for all rotating parts, which results into long life of the machine, lesser requirement of lubrication, elimination of play in moving parts of the machine. Strong & sturdy structure Reduced maintenance cost because all the machined parts are highly precise & accurate. Machine can be cleaned thoroughly by water. Teflon seal provided for main blade whereas gland packing and air seal provided for granulating blade.

Electrical Specification

Item	Make
AC VFD Drive	Schneider / or Equivalent
Electric Motor	Rotomotive / Crompton Greaves or Equivalent
Pneumatics	Janatics / Festo or Equivalent
Electrical Parts / Switches	Salzer / Teknic or Equivalent

Boson – Multi Mill  /  Grinding Mill extremely reliable, perfect for even the most demanding of processing requirements Production. This Equipment balances performance with simplicity, to provide a solution that guarantees a high output but is easy to operate, clean and maintain.

The Multi Mill is suited to dry & fine milling in the pharmaceutical, food, chemical and consumer goods industries. The mill can easily be adapted for use on different products, simply by changing the granulating screen, presenting a cost-effective solution to your size reduction requirement.

Technical Specification

Model	BMM-10
Contact Parts	SS -316 Material
Non Contact Parts	SS -304 Material
Output **	2 to 10 Kgs/Hr.
Rotor Assembly Diameter
Rotor Speed	Min 700 rpm & max 2800 rpm Variable
Beaters	12 Nos. knife impact edges & 02 Nos. Scraper blades
Screen dimension	Inner Diameter 163 mm./ Height 85 mm
Motor	0.5 HP. / 2800 RPM / 3 Phase
AC VFD Drive	0.5 HP
Starter	“ DOL “ with reversible switch
Material Charging Height	910 + – 5 mm
Material discharging Height	470 + – 5 mm
Noise Level	< 75 db
Surface Finish	Inside Contact Parts – Mirror Finish 240 Grit Outside Non Contact Part – Matt Finish 150 Grit
O rings , seals & gaskets	Silicone food grade
Overall dimension in mm	L 500 x W 500 x 750 H
Net Weight	45 Kgs.

Utility Requirement

Electric Supply Voltage

3 Phase / 415 Volt /50 Hz

Note-Electric voltage & frequency can be provided as per customer’s requirement to specify while placing an order.

Salient Features

All Electrical Parts used CE Certified Company Direction  of Beaters can be changed by reversible switch All Contact parts can be easily and quickly dismantled and cleaned.Machine is designed for Continuous operation.Cylindrical screen for higher output. ✓   Low maintenance, Simple to operate. ✓   No metal-to-metal contact. ✓   Variable speed with RPM display. ✓   Flexible feeding Facility. ✓  Provide option of inline milling with Rapid Mixer, Blender & Sifter machines. ✓  Achieve Uniform particle size quickly. ✓  Low Noise operation with low Heat and Dust. ✓   Easy changeable screens. ✓   Castors for mobility. ✓   Sturdy cGMP construction.

Electrical Specification

Item	Make
AC VFD Drive	Crompton / Schneider /   or Equivalent
Electric Motor	Crompton Greaves or Equivalent
Electrical Parts / Switches	Salzer / Teknic or Equivalent

Optional at Extra Cost as per Client Requirement

Flame Proof Motor Flame Proof Control Panel Extra Sieves ( Screen )

Purpose  : Fluid bed dryer is a process unit for Drying of granulated materials for solid dosage forms in batch operations.

BOSON Fluid Bed Dryer offers an effective and efficient method for drying & granulating. By using modular construction and simplified design, we provide flexible installation.

cGMP : FBD is designed to achieve all the requirements of cGMP – Current Good Manufacturing Practices. The components are easily dismantable, can be cleaned thoroughly and assembled in quick time. It is invented keeping in mind the latest cGMP norms with all contact parts AISI 316 Quality.

Process Chamber / Unit

The Process Unit is two piece , made of stainless steel 316 Material / The finish employed externally will be all welds ground back and polished into the surrounding materials. All of the product contact surface (SS-316) are mirror finished & All of the external surfaces of the Dryer and all non contact/sight parts will prepared with a uniform fine texture matt finish / Particular attention has been paid to reduce any source of material Entrapment by mirror polishing flush all welds to create crevice free profiles both internally and externally. The expansion chamber containing the filter finger bags & dished end are made of single piece construction from SS-304/316 quality steel. Below that is the retarding chamber made out of S.S. 304 Retarding chamber is locked with the explosion chamber by means of clamps. The length of the retarding chamber is such designed , thereby providing extra large heat exchange are which exposed each and every particle or the charged batch in the Fluidized air resulting in instant drying. Specially designed base is provided for air vortex effect and to give added strength. / A central drain is provided in the base to release wash water / Window – Bull eye windows with toughness glass & Lamp for process chamber

Bowl / Product Container

Product bowl is a conical shaped manufactured form SS-316 grade stainless steel having stainless steel mesh ( Sieve Dutch Weave SS-316 ) support along with fine finish air mesh. / The product container Trolley is of Tubular construction made form SS-304 pipe mounted on polypropylene castor wheel (2nos fixed & 2nos. Swivel for maneuverability) which imparts rigidity to carry the product container with the charged load. The batch loading capacity is always higher in case of “BOSON” Fluid Bed dryer, because of better fluidisation by varying the frequent shaking of the finger bags. Shaking period vary depending on the nature of products. Inner Surface – Mirror Finis & Outer Surface – Matt Finish / All Standard Features Like  –   Temp. measuring port , sampling port , bull-eye window & disconnect type bottom screen .

Rubber Gasket

A solid ‘D’ shaped food type silicon rubber gasket is provided in the groove of the flanged joint (between the product container and the retarding chamber) to prevent any leakage of air with fines during operation.

Uniform Lifting of Container

Product container is lifted by specially designed arrangement with the help of one centrically fitted pneumatic cylinder which ensures uniform lifting throughout the periphery of the container which ultimately gives uniform upward pressure to the solid ‘D’ shaped Rubber Gasket, thereby preventing any leakage during operation.

Auto Shaking Device

Pneumatic cylinder is used for auto shaking device of the finger bags is mounted on the body and is fitted with a wire rope made out of S.S. 304 guided by pulleys thus rendering the shaking extermely efficient. It also brings down the finger bags to such a level that these can be inspected very easily form the bottom of the retarding chamber. If the shaking is not efficient, the particles will be retained in the finger bags and there will be no proper fluidisation resulting in formation of lumps in the products container.

Air Handling Unit

Blower and filter with heating arrangement are housed in the rear chamber . They can also be housed the services zone to avoid sound pollution as well as to avoid interference of the maintenance people in the production zone. BLOWER– Centrifugal type blower fan with dynamically balanced impeller and backward curved blades. All Stainless steel construction. Direct coupled non-flameproof electric drive. Anti-vibration mounting and independent sub-support frame. Air filter – Free standing unit constructed from aluminium anodisedl frame work (SS-304) with doubled skinned panels. All wall panels are cross based for added strength . Quick release panels provided for inspection and maintenance access. The air intake section has a full face external flange for attachment of angle intact, or and extended inlet air duct. Inlet system compression of 20 Micron washable filter. followed by 5 micron prefilter, then pass through , heating coil section containing a full air duct steam operated heater battery, constructed with stainless steel tubes and headers and a steel casing (SS-304). The moving process air passes through the steam heater to achieve the desired temperature. to match the inlet to the processing unit. PT 100 temperature sensing probe will be fitted into the air Transtion duct and will be connected upto the control panel.

Explosion Vent

As per international practices the equipment is provided with a rapture disc as measures of explosion Vent, Tested at 2 Bar pressure, mounted on the side of the dryer.

Electro Pneumatic Control Panel

A free standing steel control panel having the following controls. Inlet air temperature controller. Exhaust air temperature indicator Product bowl lifting & lowering valve. Process air Damper regulation Process Timer Blower motor, start & stop. Compressed air pressure quages. Filter bag shaking timer Solenoid valves etc. R.Y.B. for Phase indication MCB for motor & power ON/OFF Contactor , Relay . ect……

Programmable Logic Control System

Fully automated PLC – HMI Touch Screen control system are available for selection at an appropriate level of additional cost. (Optional)

Technical Specification

Model	BFBD-1 Kg
Working Capacity	2 Liters.
Blower Motor	2 HP /2880 rpm / Crompton Make
Elec. Heating Temp. up to 900C	8 KW
Contact Parts	SS -316 Material
Non Contact Parts	SS -304 Material
Structure	SS- 304 Material Squire Pipe
Product Container	SS316 One Set of Product Bowl & Trolley PU Wheels
Bag Shaking	Pneumatic System
Bowl Lifting	Pneumatic System
Product Filter Bag	PC Satin / Mesh Size – 10 Micron / Max. Temp – 110 deg.
Blower Type	SS Machine Mounting
Blower Impellor	Aluminum
Pressure Gauge	For Operating air pressure, blow back filter system, container seal Position – Operating terminal / Make – Festo / Janatics /  Range – 0-10 bar
Temperature sensor	MOC – SS 304 /  Position – Inlet air ducting, Outlet ducting, Product Container / Temperature range – 0-150 degree C
Inflatable seal	MOC –Food grade / Max. pressure – 4.5 bar / Product bowl
Pre filter	Filter class – EU 4  / Efficiency – 90-95 % (10.0 Micron)
HEPA filter ( Optional )	Filter class – HEPA. / Efficiency – 99.97 % (down to 0.3 Micron)
Application	Machine shall be used to dry Wet Pharmaceuticals materials.
Non-Applicable	Machine should not be used for materials restricted under Narcotics Act.  It should not be used for explosive & / or radioactive materials.
Limitations	Machine is not suitable for drying liquids or pasty materials.
Dimension  L x W x H in mm	L 1200 x W 1200 x H 1600  mm

Utility Requirement

Electric Supply Voltage	3 Phase / 415 Volt /50 Hz
Compressed Air for Spraying System	6 Bar (87 PSI)

Note-Electric voltage & frequency can be provided as per customer’s requirement to specify while placing an order.

Salient Features

✓ All contact parts are S.S. 316 & Non-contact parts SS 304 as per cGMP Standard. ✓ Automatic pneumatically operated blowback filter cleaning system. ✓ High Precision and effective drying technology. ✓ Easy to install, operate, clean, convenient & user friendly. ✓ Inbuilt design with Inlet hot air and exhaust air blower (AHU) ✓ Safe earthing system ensures complete elimination of static charge. ✓ Perforated air distribution plates 65% open along with Dutch weave mesh. ✓ On line sampling Port. ✓ Pneumatically operated inflatable food grade seals provided for product container. ✓ Sealing with pressure switches & FRL to ensure fail safe operation. ✓ Minimum handling more Hygienic. ✓ Explosion relief disc.   Safety Features ➢ Explosion vent is provided with rupture disk. ➢ Safe Positive Earthing Device ensures complete elimination of static charge. ➢ Product Bowl interlocking mechanism. ➢ Automatic Temperature & controls, Process cycle controls. ➢ Air pressure safety switch installed to ensure pressure is in limit. ➢ Overload relay Protection and Emergency stop button.

Electrical Specification

Item	Make
AC VFD Drive	Schneider /   Siemens or Equivalent
Electric Motor	ABB / Crompton Greaves or Equivalent
Pneumatics	Janatics / Festo or Equivalent
Electrical Parts / Switches	Salzer / Teknic or Equivalent
Solid Flow monitor (Broken bag detector) (Optional)	One-n-only Make  Optional)

Optional at Extra Cost as per Client Requirement

Advance PLC controls with touch screenFlame Proof Construction/Motor Solid (slow) Flow monitor (Broken bag detector). Fan  motor unit & Filtration unit can be placed in remote areas – optional Heating mode can selectable # electrical / steam / thermic fluid – optional

Lab Press Rotary Tableting Machine is table-top design for R & D and small batch production. This  Single sided R & D Tablet Press fully conforms to cGMP and the safety requirements. All Electrical settings can be performed by Front panel with indicators at the front of the machine. The turret is driven by center shaft drive mechanism by a motor and Powerful Reduction gear box. The turret speed is adjusted by A.C. frequency drive. The drive is provided by an inbuilt three-phase motor with A.C Frequency Drive (inverter). The compression force can be adjusted up to 6 tons. The cleaning easy to dismantle and operator safety are given to attention in the machine design.

TECHNICAL DETAILS
Model	BMLP
Type of Tooling	Multi Tooling
No. of Station	12 Stn. ( 4 stn. “B” , 4 Stn. “BB” & 4 Stn. “D” )
Max. Operating pressure	6.5 Tons.
Max. Tablet Diameter	23.0 mm (for “D” Tooling only)
Max. Depth of fill	20.0 mm (for “D” Tooling only)
Output Tab./Hour	2,400 to 7,200
Turret RPM	10 – 30
Main Electric Motor (Driven through ACVF)	2 HP / 1440 RPM
Electric Supply	220 V/ 50 Hz / 3 Phase
Machine Dimension (L x W x H ) in mm	850 x 600 x 1100
Machine Weight	450 Kgs. ( Approx.)

SPECIAL FEATURES LAB PRESS

• The speed of the turret is adjustable through ACVF variable drive.
• Excellent accessibility for quick cleaning and product conversion.
• Turret – Central drive Mechanism with Powerful Gearbox.
• All critical parts made in CNC machines.
• Totally enclosed. GMP model.
• All Fasteners are of SS 304.
• All Guards magnet catch with Stainless steel Covers.
• All Bakelite Knobs Fixed with stainless steel threaded studs.
• Lower cam track can change without lifting Turret & no need of any setting.
• Charging Hopper with Powder Level window.
• Turret Guard with full height to cover wiper seal area.
• Utilizes “TSM” or “EU” “B”, “D” and “BB” standard tool configurations.
• Lower roll carrier Oil tray with SS 304 material.
• All Electrical Components are CE approved.
• Lower Punch Wiper seal with NT6/a is an Acrylonitrile Butadiene Rubber compound of Hardness Shore ‘A’ 88°, Temp range 40°C to 100°C, surface roughness static – 0.8 μm with corrosion resistant metal ring houses NBR element for smooth Lower punch operations.
• Minimum 2 mm thickness tablet can be press.
• Main Machine Bottom Plate Cladded with SS 304.
• Turret & Cam Tracks Processed by Electrode less Nichol Plated (ENLP) for Long life.
• Special R & D Purpose machine with Combined “B”, “BB” & “D” Tooling available.
• Pressure Roller & Pins are processed with hard heat-treatment.
• Low noise level.
• Miniature Circuit Breaker for over load Protection as a Safety Feature.
• Electrical voltage & frequency can be provided as per customers requirements.

Operation

Boson – Conventional coating machine are used to coat tablets, pills, etc. in for a variety of industries such as Pharmaceutical, Confectionery, Food and others. They are also used for rolling and heating beans and edible nuts or seeds. The product is to be filled inside the pan. During the rotation motion, coating material is sprayed by spraying system according to the technological process and rational technological process. So, process materials (product) are coated due to rotating pan. The coating round pot is rotated by variable speed. At the same time hot air is supplied through inbuilt Hot air blower system which dries rapidly (heating or cooling) and evenly thus forming a solid and smooth surface.

Model	BCP –12”
Contact Parts	SS – 316 Material
Non Contact Parts	SS –  304 Material
Pan RPM	2-45
Speed Controller By AC VFD Drive	Speed can be Adjust by Speed Knob between 0 to 45 RPM.
Surface Finish	All Product Contact Parts – Mirror Finish All the Non-Contact Parts   –  Matt Finish
Gear Motor Drive	Pan Motor HP is given in technical sheet model wise . Sturdy & Maintenance Free Geared Motor for continuous operation.
Hot Air Blower	Blower Motor HP & Electric Heater KW is given in technical sheet model wise . The unit is with a hot air blower consisting of Model wise HP, 3 phase AC Motor with centrifugal blower and Model Wise Kw electric heater chamber. The air can be heated to the desired temperature and controlled with the help of a digital temperature controller cum indicator.
Coating Pan	Stainless Steel 316 quality Coating Pan with a circular mouth for easy charging & Discharging of Tablets & mounted at an inclination of 350 .
Control Panel Board	An Electric control panel fitted on the machine consisting of switches for Pan, Hot Air Blower, Heater, Exhaust Blower, Speed controller switches for Pan, Blowers, Digital Temperature controller cum indicator etc. The Heaters and blowers are interconnected for the safety purpose so that heaters can be started only if the blower is on.
Mixing Baffles	Easily Detachable for cleaning.
Operating Temperature	30 to 80 degree C.
Spray System	The Unit is provided with Peristaltic pump with Spray gun & silicon tubing’s. Pump is a Variable speed pump provided with digital controller for precise speed regulation and rapid priming facility. Pump flow rates 0.5 ml to 100 ml. Flow rate of the spray can be controlled with the easy setting of the Peristaltic pump.
Spray Nozzle	Flat Fan SS 316 Spray Gun with height adjustable stand.
Peristaltic Pump	1 to 100 RPM, 0.5 to 100 ml/min Flow rate.
Noise Level	< 75 db

Technical Specifications

Model	BCP12
Pan Size	12”
Loading Capacity in Ltrs.	15
Motor H.P.	0.5
Blower H.P.	0.5
Heater Capacity in Kw.	1.0

Utility Requirement

Electric Supply Voltage	3 Phase / 415 Volt /50 Hz
Compressed Air for Spraying System	6 Bar (87 PSI)

Note-Electric voltage & frequency can be provided as per customer’s requirement to specify while placing an order.

Salient Features

Design is as cGMPAll contact parts are made of SS 316 and non-contact parts are SS 304.Totally enclosed with MS cladding with standard gearbox, motor, and hot air blowing arrangement by variable speed for pan.Designed with fabricated structure and all arrangement except electric control, and SS Pan are inside the enclosure, which makes simple cleanable outside covering.Low maintenance, easy-clean design.Variable speed with RPM display.AC frequency drive for Pan.Spray gun, peristaltic pump & pneumatic controls.

Item  / Make

AC VFD Drive	Schneider or Equivalent
Main Electric Motor	ABB / Crompton Greaves or Equivalent
Pneumatics	Janatics / Festo or Equivalent
Peristaltic Pump	Flowtech
Switches	Salzer / Teknic or Equivalent

Optional at Extra Cost as per Client Requirement

Solution Preparation Vessel 10 LtrsSolution Preparation Vessel with Heating Jacketed Solution Preparation Stirrer

MAIN DRIVE – BAP  

The Main Drive –BAP with AC Drive  is the basic machine of the All-purpose equipment. All our Multi-attachments units can be easily and quickly connected and disconnected to the main drive with the help of two quick locking and unlocking hand knurled knobs & it features a 1 HP, 230 V / 110 V, 50 Hz / 60Hz, Single Phase fitted  The Main motor Drive is equipped with a very efficient & maintenance free gearbox with maximum torque.

The speed is variable and can be adjusted infinitely between 5 to 450 RPM working range by an electronic speed control. This is done via an electronic speed controller and the corresponding rpm is displayed digitally.

The drive also includes a Digital timer in order to set time-based operations. A separate 15 Amp. Power supply socket provided for attachments require heating system.

We reserve the right to modify or improve the specification of this machine at any time.

Technical Specifications

Model	Main Drive –BAP
Contact Parts	SS – 316 Material
Non Contact Parts	SS -304 Material
Main Gear Motor	1 HP, 230 V / 110 V, 50 Hz / 60Hz
Maximum output torque at continuous operation.	55 Nm torque
Timer adjustment	0 to 999 minute
Speed Adjustment	Infinitely
RPM	5 Minimum to 450 Maximum
Dimensions in inch L x W x H	24” x 15 “ x 20 “
Net Weight	50 Kgs
Gross Weight	75 Kgs.